Pleasant thermal radiation without raising dust
Even high rooms are warmed up evenly
Ideal when switching to
heat pump
The air is cool, but thermal radiation compensates for this. According to this principle The radiant heating system also works. All surfaces in the room heat up and radiate this The heat is on us. This reduces the need for heating. In such a room, we humans are gently surrounded heated heating surfaces from all sides sides'. Thus, there is no need to heat The air and drying it makes us feel completely comfortable
Radiant heating heats the surfaces,and not the air in indoors. The ceiling, walls, furniture and floor become warmer than the air. The warmer the surface, the more they radiate heat. The air remains pleasantly fresh and it does not overheat. This increases comfort and reduces the need for heating.
Conclusion: low feed temperatures are sufficient to ensure that increases the efficiency of the heat pump.
Convection against radiant heat:
| Radiator | 90% convection | 10% radiation |
|---|---|---|
| Radiant heating | 10% convection | 90% radiation |
Floor system
Traditional radiator
This allows you to reduce the temperature to 5 ° C compared to the outside temperature.
High level of comfort thanks to draught-free cooling.
For old and new buildings
You can use the existing heating system - Height
rooms up to 10 m.
No radiators
Floor covering of your choice
Healthy heating and cooling
Draught-free temperature control
Silent cooling
There is no dry air in the room
Comfortable radiant warmth
Less dust
Uniform temperature
Suitable for allergy sufferers
Reduces mold formation
Energy conservation
Dry and warm walls and floors
Reducing the temperature in the room with constant comfort
Cold ceilings and ceilings already provide
the building has an increased need for cooling, which awaits us
due to climate change.
Cooling without the risk of a cold
A person breathes 24,000 times a day. This is before 12,000 liters of air entering our the lungs, including all the substances that are in it are located.First of all, this is a home dust. People suffering from allergies, first of all the queue realizes the value of the microclimate with low dust content in the room. Our a system based on radiant heat, allows people to breathe cleaner with air, because when heated in it generates significantly less dust than in convection-based systems.
Protection against mold and moisture
Mold is more than unpleasant and dangerous for people and buildings. Radiant systems are active
they prevent mold growth because they primarily heat the shell of the room,
not the air. If the walls are warmer than the air, they will remain dry and will not be a breeding ground for
mold.
In summer, the walls and floor can get very hot under exposure to direct sunlight and waste heat. These overheated surfaces they emit a lot of heat and disrupt natural human thermoregulation.
When cooling, all overheated surfaces now they transfer their heat through air exchange to a cooler ceiling, where it is permanent it is discharged together with the cooling water. At the same time the surfaces are cooled and, accordingly,, radiate less heat into the room. Now a person can again radiate his excess Warm up in a cooler environment and feel I feel comfortable. Ideally, a cold ceiling it is complemented by controlled ventilation in residential areas.
We will be happy to provide you with an installation specialist. Refer to our assembly instructions and/or installation instructions(Go to Projects), and we will also be able to perform an express cost calculation materials and installation according to your project(Go to "express calculation")
(Go to "support").Do you have your own company or masters for installation? We also provide personal briefings and the necessary tools, if necessary. Personal consultation. One phone call is enough, and we We will contact your personal contact person.
Copyright @ Designed By Matrjoška